MN-91-105 Cordless drill-driver with battery 18 V li-ion

Durable and strong battery screw gun 18 V supplied from Li-Ion batteries

Features and benefits

  • New series of durable Modeco Expert Supreme power tools is dedicated to the most demanding users
  • Lithium ion batteries are more efficient than batteries of older types (Ni-MH or Ni-Cd). Moreover, they do not exhibit memory effect and they keep the charge, which means they are always ready to work. Li-Ion batteries are also lighter at the same voltage compared to Ni-MH or Ni-Cd batteries
  • Two gears allow the speed and torque to be adjusted to the work being performed
  • 22 settings of coupling enable you optimal selection of torque for screwing various types of screws depending on the type of substrate
  • Ergonomically placed direction of rotation switch (left/right) allows the user to quickly change between screwing in and screwing out
  • Electronic protection stops the tool if the drill bit is stuck in the material in order to protect the user and the tool (motor and battery)
  • LED lighting is located on base of the tool and therefore the handle does not cover the working location
  • Handing for fixing screw gun on belt allow you to work in places where it is impossible to put the tool away. It may be installed on right or left side of the tool for right- and left-handed users
  • Wrist lanyard protects against accidental dropping the tool. It may be also used to hang the tool during breaks
  • Rubber-lined, profiled handle increases grip and work comfort
  • Handy and light design reduces fatigue during long work sessions and allows the tool to be operated comfortably with only one hand
  • Rubber-lined body components ensure safe position of the tool without fear of scratching the substrate and increase comfort and safety of using the second hand
  • Modes of planetary gear are made of high-quality steel, which influences the service life of the tool
  • 2 Li-Ion batteries and quick charger in a kit ensure continuous operation
  • Carrying case enables easy transport of and provides convenient storage space for the tool and all its accessories
  • A reach set of accessories enables a large variety of works to be carried out
  • Red Plug Service guarantees quick repair of a broken tool though free courier shipment from and to the customer

Are you looking for a supplier of equipment and tools?

Fill out the form with your details and send us an inquiry Adjustable wrench and deburrer for plumbers Modeco Expert

Your inquiry will be processed by our sales team. Note: this is not a product order.

    Base material

    • Aluminium

      Aluminium

    • Hollow brick

      Hollow brick

    • Plastic

      Plastic

    • Structural Steel

      Structural Steel

    • Board

      Board

    Equipment

    • 2 batteries Li-Ion, 14,4 V, 1,5 Ah
    • 6 tips with a magnetic shank
    • 6 metal drills
    • Belt strap
    • Quick charger
    • Carrying case

    Product information

    Index

    Voltage

    Box

    Outer

    Box weight

    Outer weight

    EAN

    [V]

    [pcs]

    [pcs]

    [kg]

    [kg]

    MN-91-105

    18 V

    1

    5

    2.8

    14.0

    5906675397696

    <Cannot calculate ''
    '.length == 0 && 5 != 4;' expression: <eval>:1:1 Missing close quote
    '
    ^ in <eval> at line number 1 at column number 1 IN Frame [TechnicalSpec (28003682)] under Group [Product Information (28003738)]>

    Downloads

    Need documents for other product? Visit our Technical Library.

    go to library

    Corresponding products

    MN-15-30 25 mm PH bits

    MN-15-30 25 mm PH bits

    MN-68-601 Shank mounted grinding stone set

    MN-68-601 Shank mounted grinding stone set

    MN-15-31 25 mm PZ bits

    MN-15-31 25 mm PZ bits

    MN-79-06 Mixing paddles type A for mixing paints and liquid materials

    MN-79-06 Mixing paddles type A for mixing paints and liquid materials

    MN-60-2 Ground bits for metal HSS-G

    MN-60-2 Ground bits for metal HSS-G

    MN-61-05 Straight drill bits for concrete

    MN-61-05 Straight drill bits for concrete

    MN-61-50 Straight bits for wood

    MN-61-50 Straight bits for wood

    MN-61-20 Bits for ceramics and glass

    MN-61-20 Bits for ceramics and glass

    MN-15-334 25 mm HEX bits

    MN-15-334 25 mm HEX bits

    MN-61-2 Hole saws, plates made of cemented carbides HEX

    MN-61-2 Hole saws, plates made of cemented carbides HEX

    MN-69-1 Full-cable twisted brass-coated wire brushes

    MN-69-1 Full-cable twisted brass-coated wire brushes

    MN-60-9 Set of ground bits for metal HSS-G

    MN-60-9 Set of ground bits for metal HSS-G

    MN-61-10 Set of straight drill bits for concrete

    MN-61-10 Set of straight drill bits for concrete

    MN-61-57 Set of straight bits for wood

    MN-61-57 Set of straight bits for wood

    MN-15-34 25 mm TORX bits

    MN-15-34 25 mm TORX bits

    MN-69-19 Brass-coated wire cup brushes

    MN-69-19 Brass-coated wire cup brushes

    MN-60-4 Straight bits for metal HSS-R

    MN-60-4 Straight bits for metal HSS-R

    MN-61-61 Spade bits for wood

    MN-61-61 Spade bits for wood

    MN-68-605 Backing pad for drills

    MN-68-605 Backing pad for drills

    MN-15-322 25 mm slotted bits

    MN-15-322 25 mm slotted bits

    MN-76-020 Tile hole cutter

    MN-76-020 Tile hole cutter

    MN-60-93 Set of straight bits for metal HSS-R

    MN-60-93 Set of straight bits for metal HSS-R

    MN-61-75 Set of spade bits for wood

    MN-61-75 Set of spade bits for wood

    MN-68-606 Backing pad with joint for drills

    MN-68-606 Backing pad with joint for drills

    MN-15-381 50 mm PZ bits

    MN-15-381 50 mm PZ bits

    MN-61-246 Pilot bit for diamond hole saws

    MN-61-246 Pilot bit for diamond hole saws

    MN-79-0 Multi-purpose mixing paddles

    MN-79-0 Multi-purpose mixing paddles

    MN-61-801 Unibits for metal

    MN-61-801 Unibits for metal

    MN-61-650 Set of bits for cutting knots in wood

    MN-61-650 Set of bits for cutting knots in wood

    MN-68-609 Backing pad with lining for angle grinders and drills

    MN-68-609 Backing pad with lining for angle grinders and drills

    MN-15-391 50 mm PH bits

    MN-15-391 50 mm PH bits

    MN-76-120 Fixing ring for tungsten-coated hole saw bits

    MN-76-120 Fixing ring for tungsten-coated hole saw bits

    MN-69-1 Set of brass-coated steel wire cup brushes

    MN-69-1 Set of brass-coated steel wire cup brushes

    MN-61-65 Sets of bits for cutting knots in wood

    MN-61-65 Sets of bits for cutting knots in wood

    MN-15-402 25 mm PH TiN Torsion bits

    MN-15-402 25 mm PH TiN Torsion bits

    MN-76-122 Pilot drill bit for tungsten-coated hole saws

    MN-76-122 Pilot drill bit for tungsten-coated hole saws

    MN-61-686 Bits for concealed hinges

    MN-61-686 Bits for concealed hinges

    MN-15-412 25 mm PZ TiN Torsion bits

    MN-15-412 25 mm PZ TiN Torsion bits

    MN-76-12 Tungsten-coated hole saws

    MN-76-12 Tungsten-coated hole saws

    MN-61-6 Bits for confirmant screws

    MN-61-6 Bits for confirmant screws

    MN-15-452 25 mm PH Torsion bits

    MN-15-452 25 mm PH Torsion bits

    MN-61-4 Bi-metal hole saws for wood, metal and aluminum

    MN-61-4 Bi-metal hole saws for wood, metal and aluminum

    MN-15-462 25 mm PZ Torsion  bits

    MN-15-462 25 mm PZ Torsion bits

    MN-61-45 Pilot bits for bi-metal hole saws

    MN-61-45 Pilot bits for bi-metal hole saws

    MN-15-351 PH double ended bits

    MN-15-351 PH double ended bits

    MN-76-104 Tungsten-coated hole saw set

    MN-76-104 Tungsten-coated hole saw set

    MN-15-352 PZ double ended bits

    MN-15-352 PZ double ended bits

    MN-65-6 Hole saws with hardened teeth

    MN-65-6 Hole saws with hardened teeth

    MN-15-39 long PH bits

    MN-15-39 long PH bits

    MN-65-62 Hole saw set with hardened teeth for wood and drywalls

    MN-65-62 Hole saw set with hardened teeth for wood and drywalls

    MN-15-50 Bit set 25 mm

    MN-15-50 Bit set 25 mm

    MN-15-52 Bit set 50 mm

    MN-15-52 Bit set 50 mm

    MN-15-152 PH2 bits 25 mm with stop ring

    MN-15-152 PH2 bits 25 mm with stop ring

    MN-15-54 Set of bits for drill-drivers

    MN-15-54 Set of bits for drill-drivers

    MN-16-00 Sockets with 1/4

    MN-16-00 Sockets with 1/4" drive with magnet

    MN-16-10 Bit shank made of steel with magnet

    MN-16-10 Bit shank made of steel with magnet

    MN-16-105 Bit adapter made of aluminium with magnet

    MN-16-105 Bit adapter made of aluminium with magnet

    MN-16-110 Bit shank made of steel with quide

    MN-16-110 Bit shank made of steel with quide

    MN-16-20  Quick change bit shanks

    MN-16-20 Quick change bit shanks

    MN-16-20 Quick change bit shanks

    MN-16-20 Quick change bit shanks